Jiayu S3 - Прошивки (OS 4.4.x )



Реп: (415)
Jiayu S3 - Прошивки (OS 4.4.x )
Изображение JiaYu S3
Описание | Обсуждение » | Покупка » | Аксессуары » | Прошивка » | Jiayu S3 - Прошивка (OS 5.x.x ) » | Jiayu S3 - Прошивка MIUI (OS 5.x.x) » | Клуб владельцев Jiayu S3 » | Jiayu S3 - Брак » | Энергопотребление (автономность) Jiayu S3 » | JiaYu S3 - Прошивка (OS 6.x.x) » | Прошивки (OS 7.x.x) »

Драйвера и утилиты
Прошивки
КАТЕГОРИЧЕСКИ НЕ РЕКОМЕНДУЕТСЯ ПРОШИВАТЬ ТЕЛЕФОН ПРОШИВКАМИ, НЕ СООТВЕТСТВУЮЩИМИ ЕГО МОДЕЛИ!!!
5.1 (при переходе с 4.4) шьется в режиме "Firmware Upgrade".

Расшифровка сокращений в заводских прошивках:
S3 - модель телефона
S - модель с 3Гб
W - world с Google Apps
2015XXXX - дата выхода прошивки
XXXXXX - время выпуска прошивки

Все офф. прошивки на яндекс диске

Android 4.4.4


Recovery
Патчи
Инструкции
ART не работает вместе с xposed. Т.е если установлен xposed, ART не запустится.Обьяснение тут
Рут включается в настройках-безопасность-superuser
Как сделать, чтобы от приложения email приходили уведомления о новых письмах
Инструкция по правильному возврату с Android Lollilop на Android KitKat
Ещё одна инструкция по правильному возврату с Android Lollilop на Android KitKat.
удаления всех "Закладок" из прошивки
Инструкция установки 5.1
Детально восстановление кирпича. Еще один вариант.
Инструкция по установки драйверов и прошивке
Видеоинструкции по установке драйверов и прошивке через FlashTool
Универсальная инструкция по прошивке через рекавери
Инструкция по прошивке через FlashTool
Как прошить Recovery через Flash Tool___ Еще одна инструкция по прошивке Recovery
Как установить Google Play
Инструкция по установке Google Apps без Recovery
Инструкция по изменению номера SMS центра
Прошивка "трупа"
Отключение ненужных радиочастот
удаление всплывающей рекламы "lucky" и "ease"
Полезное
Скриншоты опросов
Прикрепленное изображение

K
В теме нет куратора. Если в теме есть пользователь, желающий стать Куратором и соответствующий Требованиям для кандидатов, он может подать заявку в теме Хочу стать Куратором (предварительно изучив шапку темы и все материалы для кураторов).
До назначения куратора, по вопросам наполнения шапки, обращайтесь к модераторам раздела через кнопку Изображение под сообщениями, на которые необходимо добавить ссылки.


Сообщение отредактировал destroyer71 - 31.10.23, 04:24
Причина редактирования: Убрал битую ссылку



Реп: (7)
Jiayu S3: Android 4.4.4 . Скопировано с сайта www.needrom.com

1) Распакуйте FlashTools, и нажмите на Flash_tool.exe
2) Выберите в MT6752_Android_scatter.txt в ROM
3) Подождите, файл будет добавлен в Flash Tool
4) Выбрать Option-> USB Model, нажмите USB Model
    -> Выберите Option-> DA DownLoad All->Speed->High Speed, нажмите High Speed
5) Выключите телефон
6) "Нажмите клавишу F9 (кнопка Загрузить)" или "если обновление ROM Firmware-> Upgrade"
7) И при подключении телефона к компьютеру с помощью кабеля для передачи данных USB.
8) Процесс начнется и появится красный индикатор, после фиолетовый цвет и желтый.
9) И зеленые круги на дисплее
10) Готово!
11) Теперь вы можете безопасно выключить и включить ваш телефон.

Ссылки на скачивание:
FlashTool
Jiayu s3 ROM 2 – s3 – S3 20150117-172407 – mt6752_h560_s3_jyt_cc_kk_lte_5m-cs_tphone – KTU84P
Jiayu s3 Advanced ROM 1 – S3 20150113-142450 – mt6752_h560_s3s_jyt_cc_kk_lte_5m-cs_ldata_tphone – KTU84P

Сообщение отредактировал HEqp0pMaJI - 24.01.15, 22:56



Реп: (7)
Инструкция - JiaYu S3 - Обсуждение (Пост #37509516)
Скачано с www.needrom.com

Сам лично не тестировал.
Фикс GPS для MTK http://www.needrom.com/download/gps-mtk-fix/
Драйвера USB MTK ссылка


Прошивки:

Basic - Jiayu S3 2gb

ROM 2 - JIAYU S3 - Basic - Update 01/20/2015 (mt6752_h560_s3_jyt_cc_kk_lte_5m-cs_tphone – KTU84P – Basic – 2G Ram)
ROM 3 - JIAYU S3 - Basic - Only WCDMA (mt6752_h560_s3w_jyt_cc_kk_lte_5m-cs_mul_tphone – KTU84P – Basic – 2G Ram)

Gapps include – No Rooted
Language support: Multilang

Сообщение отредактировал HEqp0pMaJI - 01.02.15, 20:35



Реп: (142)
mazax1ct @ 01.02.2015, 21:22 *
блин, создание полного бекапа это какой то ужас!

Я бы еще предложил вам проверить на работоспособность twrp 2.8.2.0, просто заменить в папке с прошивкой. Не работает!!!
Вот ещё CWM Recovery v6.0.5.1 тоже бы проверил кто Прикрепленный файлs3_cwm_recovery.img ( 8.4 МБ )
. Установка или через флештул или с помощью MTK Mobile Uncle (нужен root)

Сообщение отредактировал prog2 - 06.02.15, 13:00



Реп: (2024)
Прикрепленное изображение

Carliv Recovery V6(CWM 6.0.5.1) Бэкап NVRAM
Что такое NVRAM
Добавлено меню "NVRAM backup/restore" в разделе "Carliv"
Будет создана резервная копия в папке ClockworkMod/backup/.nvram/nvram-bk/nvram.img.
Это поможет, если вы потеряете IMEI и другие функции связи

Скрины CWM
Прикрепленное изображение
Прикрепленное изображение
Прикрепленное изображение
Прикрепленное изображение
Прикрепленное изображение

Скачать Прикрепленный файлCWM_Recovery_JY-S3.rar ( 8.06 МБ )

CWM Recovery с увеличенным шрифтомТЕСТ
CWM Big Font
Прикрепленное изображение

Скачать Прикрепленный файлrecovery_CWM_JY-S3_Bg-Font.img ( 7.99 МБ )

1. Способ установить recovery с помощью Flash Tool
2. Способ(Нужен ROOT) Прикрепленный файлRashr_v2.2.7_RUS.apk ( 3.96 МБ )


Чтобы попасть в recovery надо подсоединить USB кабель к компу или ЗУ,Кнопку + и Вкл

Вопросы в QMS


Сообщение отредактировал hanuma50 - 24.02.15, 19:24
Причина редактирования: Добавил CWM Recovery



Реп: (104)
Официальные прошивки JIAYU S3 залил на яндекс-диск, кому неохота регится на нидроме или париться со скачиванием с baidu, ну и для удобства

JIAYU S3 (2Gb) 20150204-161147(Android 4.4)
Про прошивку:S3-20150204-161147
Про прошивку:
(version number S3-20150204-161147, 2015年2月5 release)
Good domain S3 Standard Edition, version 20150204 Software February 5 has been pushed over the air to users OTA upgrade your system, please note the relevant user updates.
Use of OTA-upgrade failed user, you can upgrade using a wire brush package!
Air Upgrade Instructions: ensuring network connection, the user can "set - on the phone - Wireless Upgrade" screen, click on the bottom "check for updates", when it detects the presence of the new software, you can install the prompts to download. Please note that the backup before the user to upgrade important personal data, because this update involves significant changes underlying code system, you need to restore the factory settings after the update is complete in order to completely update, please pay attention.
Note: The phone has provided good domain OTA-upgrade, you need to upgrade the air (OTA) customer service, not to make any changes to the factory system software, streamlining, otherwise it will affect the integrity of the system files, upgrade the air (OTA) service time to perform the current version of the server the latest version of differential operation, can not download the upgrade package, the upgrade will not work correctly. Use other unofficial ROM (third party) users will not be able to use the official upgrade air (OTA) service. Excerpts software version number: S3 20150204-161147 improvement points: 1, optimizing the handset sound quality. 2, optimization loud speaker sound quality. 3, the repair part of the phone call the other party listening echo problems. 4, some cell phone repair charging low battery charging slow. 5, part of the phone's desktop optimization Caton, WIFI dropped the issue. 6, optimizing the number of other BUG. Brush before, pay attention to back up the phone in advance of all important data and personal information, such as phone book, text messages, photos, video, application software, all data will be lost after the upgrade.
Wire brush Package Download: http://pan.baidu.com/s/1c0CjODa
Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1


JIAYU S3W (2Gb) 20150205-141543(Android 4.4)
Про прошивку:S3W-20150205-141543
–> GooleApps are included


JIAYU S3 (2Gb) 20150319-073039(Android 4.4)
Про прошивку:S3-20150319-073039
Про прошивку:
(version number S3-20150319-073039, March 23 release)
This version of the ROM is available for good domain S3 Standard Edition (memory 2GB + 16GB version), and high with other versions do not use this ROM.
Release of the software version number is: S3-20150319-073039, major update points are as follows:
1. The upgraded release of the software, "restore the phone to factory settings" function will no longer remove the phone storage space in the data (such as photos, music, etc. ).
2. After the release of the software upgrade adds support card brush functions. Card brush method of operation: first brush card into the phone memory pack, then turn into the "Settings - About Phone - Wireless Upgrade" screen, enter the upper right corner of the green symbol, select local upgrade, find your phone into update.zip card brush package can be.
3. Fixed SIM card 2 Traffic identification of unclear issues.
4. Fixed part of the application to apply for permission denied, repeatedly prompted the question.
5. The majority of users should request to remove Variety unlock and font management, there is a need to download third-party applications on their own.
6. Fixed phone MTP mode to connect the computer to transfer data, crash prone to disruptions.
7. Fixed SD card storage space is full, the phone call the next call recording, the interface error prompt dial operation stops problems.
8. optimize other small BUG.
Users can brush in two ways OTA upgrade over the air upgrade or line.
Special note: Before you upgrade, please note that a backup of important data in your phone to avoid unexpected loss of data occurs. Any data loss caused by a software upgrade, we do not take any responsibility.
Air upgrade (OTA) upgrade:
users automatically update as follows:
the user in the "Settings - About Phone - Wireless Upgrade" screen, click on the bottom "check for updates", when it detects the presence of the new software, you can install the prompts to download. Cause Air upgrade fails: the need to upgrade the use of air (OTA) customer service, do not open ROOT root authority, not to make any changes to the factory system software, streamlining, otherwise it will affect the integrity of the system files, upgrade the air (OTA) service, The current version can not be performed with the server the latest version of differential operation, you can not download the upgrade package, the upgrade will not work correctly. ROOT Once opened, compared with an irreversible action, even before closing on or restore factory settings, you can not go back to the original file and the state.
Use other unofficial ROM (third party) users will not be able to use the official upgrade air (OTA) service. The air after a failed upgrade approach: wire brush to brush back the official package.
Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1
S3 Standard wire brush package:
http://pan.baidu.com/s/1bn2dPqn
S3 Standard Card brush package:
HTTP: //pan.baidu.com/s/1gdgWZN9


JIAYU S3 (2Gb) 20150411-155027(Android 4.4)
Про прошивку:S3-20150411-155027
Про прошивку:
(version number S3-20150411-155027, April 14 release)
This version of the ROM is available for good domain S3 Standard Edition (memory 2GB + 16GB version), and high with other versions do not use this ROM.
Release of the software version number is: S3-20150411-155027, major update points are as follows:
> is updated as follows:
> 1. Fixed some phone reboot or upgraded battery display will jump power problems
> 2. Fixed some phone battery display allowed to question
> 3. Optimize the rear camera video effects
> 4. optimize image clarity when local micro-channel video chat
> 5. WIFI optimize performance, modified and sometimes they can not connect properly connected WIFI network problems
> 6. optimization of several other small BUG users can upgrade the air OTA or wire brush, brush card three ways to upgrade, we recommend using a simple and convenient way to upgrade the air OTA. Special note: Before you upgrade, please note that a backup of important data in your phone to avoid unexpected loss of data occurs. Any data loss caused by a software upgrade, we do not take any responsibility. Air upgrade (OTA) upgrade: users automatically update as follows: the user in the "Settings - About Phone - Wireless Upgrade" screen, click on the bottom "check for updates", when it detects the presence of the new software, you can install the prompts to download. Cause Air upgrade fails: the need to upgrade the use of air (OTA) customer service, do not open ROOT root authority, not to make any changes to the factory system software, streamlining, otherwise it will affect the integrity of the system files, upgrade the air (OTA) service, The current version can not be performed with the server the latest version of differential operation, you can not download the upgrade package, the upgrade will not work correctly. ROOT Once opened, compared with an irreversible action, even before closing on or restore factory settings, you can not go back to the original file and the state. Use other unofficial ROM (third party) users will not be able to use the official upgrade air (OTA) service. The air after a failed upgrade approach: wire brush to brush back the official package.
Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1
S3 Standard wire brush package: http://pan.baidu.com/s/1o6oRd5w
S3 Standard Card brush package: HTTP: //pan.baidu.com/s/1gdtPn7l


JIAYU S3 (2Gb) 20150430-131240(Android 4.4)
Про прошивку:S3-20150430-131240
Про прошивку:
(version number S3-20150430-131240, May 7 release)
This version of the ROM is available for good domain S3 Standard Edition (memory 2GB + 16GB version), and high with other versions do not use this ROM.
Release of the software version number is: S3-20150430-131240 , major update points are as follows:
>> 1. Optimized Desktop Launcher fluency.
>> 2. optimization from the lock screen to unlock the desktop desktop weather widget reflect slow.
>> Upgrade 3. The optimized version of shot window display unusual problems.
>> Accuracy 4. Optimize the status bar displays the flow.
>> 5. - increase the charge indicator "Set Display" menu, message alert light control switch.
>> 6. Increase the camera shutter sound control switch.
>> 7. fixes a number of small BUG. Users can upgrade the air OTA or wire brush, brush card are three ways to upgrade, we recommend using a simple and convenient way to upgrade the air OTA. Special note: Before you upgrade, please note that a backup of important data in your phone to avoid unexpected loss of data occurs. Any data loss caused by a software upgrade, we do not take any responsibility. Air upgrade (OTA) upgrade: users automatically update as follows: the user in the "Settings - About Phone - Wireless Upgrade" screen, click on the bottom "check for updates", when it detects the presence of the new software, you can install the prompts to download. Cause Air upgrade fails: the need to upgrade the use of air (OTA) customer service, do not open ROOT root authority, not to make any changes to the factory system software, streamlining, otherwise it will affect the integrity of the system files, upgrade the air (OTA) service, The current version can not be performed with the server the latest version of differential operation, you can not download the upgrade package, the upgrade will not work correctly. ROOT Once opened, compared with an irreversible action, even before closing on or restore factory settings, you can not go back to the original file and the state. Use other unofficial ROM (third party) users will not be able to use the official upgrade air (OTA) service. The air after a failed upgrade approach: wire brush to brush back the official package.
Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1
S3 Standard wire brush: http://pan.baidu.com/s/1i37tgC9
S3 Standard Card brush: HTTP: // pan. baidu.com/s/1ntEC5ZF


JIAYU S3 (2Gb) 20150527-144240(5.1pre-release_version)
Про прошивку:S3-20150527-144240(5.1pre-release_version)
Про прошивку:
http://113.106.90.153/…Dtypeid%26typeid%3D253
[S3] [22 people praise] good domain S3 Standard Edition android5.1 system Preview, May 28, 2015 release
Special note:
Release of the software only for good domain S3 Standard Edition (2GB RAM + 16GB ROM), does not apply to other hardware version (high version of the brush after the boot LOGO interface card). Good domain release of this version of the software is Android5.1 first preview version, unofficial version of the software, there is now a lot of BUG is optimized and improved, only available to interested users Brush early adopters.
Perfect upgrade version Android5.1 system Google android5.0 system, to make up for the previous Android 5.0 "lollipop" a number of deficiencies, perfect support 64-bit CPU is one of its greatest features. Android5.1 early as March 10, 2015 release, Google official blog of Android 5.1 for a simple introduction, first of the new system is more stable, while supporting more than one SIM card, enhanced equipment protection mechanisms, which means that if you After the phone is stolen, it will be locked until you log onto their Google accounts (even if you restore the device to factory settings will not unlock). In addition, Android 5.1 also enhances the WiFi capabilities of the device (and users can enter the Quick Setup menu to choose to join a different WiFi or Bluetooth device management), added HD voice and so on.
Download:
Brush driver and utility software: http://pan.baidu.com/s/1kT7pmB1
wire brush package: http://pan.baidu.com/s/1nt9THbz Password: jdkj


JIAYU S3 (2Gb) 20150602-214001(Android 5.1)
Про прошивку:S3-20150602-214001(Android 5.1)
Про прошивку:
good domain S3 android5.1 system experience Edition, June 4, 2015 release
Special note:
Excerpts good domain S3 Standard Edition software and high version can brush experience. This version of the software is the first to experience Android5.1 version, unofficial version of the software, there are still some BUG optimization improvements are only available to interested users experience using the brush. Must wire brush upgrade, please note that the backup of important data on your phone before upgrading.
Release of the software version number is: S3-20150602-214001, compared to 5.1 preview May 28 release, this version major update points are as follows:
1. Added support for high version models.
2, fix the problem can not be charged.
3, repair horn silent problem.
4, fix the proximity sensor does not work issue.
5, repair the flash does not light problem.
6. Other small bug.
Release of the software currently known major BUG:
1, the system does not own ringtones, requiring users to download music set the tone.
2, front camera red hair.
3, loud speaker sound quality is poor to be optimized.
4, the model displayed incorrectly.
5, does not support NFC functionality
6, ......
Perfect upgrade version Android5.1 system Google android5.0 system, to make up for the previous Android 5.0 "lollipop" a number of deficiencies, perfect support 64-bit CPU is one of its greatest features. Android5.1 early as March 10, 2015 release, Google official blog of Android 5.1 for a simple introduction, first of the new system is more stable, while supporting more than one SIM card, enhanced equipment protection mechanisms, which means that if you After the phone is stolen, it will be locked until you log onto their Google accounts (even if you restore the device to factory settings will not unlock). In addition, Android 5.1 also enhances the WiFi capabilities of the device (and users can enter the Quick Setup menu to choose to join a different WiFi or Bluetooth device management), added HD voice and so on.



JIAYU S3s (3Gb) 20150204-164258(Android 4.4)
Про прошивку:S3S-20150204-164258
Про прошивку:
(version S3S-20150204-164258)
This is the S3 high version (3GB RAM + 16GB ROM) factory software, the version number: S3S-20150204-164258, general users do not update, users need only to use.
Brush before, pay attention to back up the phone in advance of all important data and personal information, such as phone book, text messages, photos, videos, applications, etc., so as not to brush after data loss.
Download:
Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1
wire brush package: http://pan.baidu.com/s/1Gsw2a


JIAYU S3sw (3Gb) 20150314-141844(Android 4.4)
Про прошивку:S3SW-20150314-141844
–> GooleApps are included


JIAYU S3s (3Gb) 20150324-194940(Android 4.4)
Про прошивку:S3S-20150324-194940
Про прошивку:
(version number S3S-20150324-194940, 2015年3月26 release)
Release of the software is only available in high version good domain S3 (memory 3G + 16G, support NFC), other versions of the model do not brush this package, or peril.
Release of the software version number is S3S-20150324-194940, major updates are as follows:
1. After the upgrade release of the software, "restore the phone to factory settings" function will no longer remove the phone storage space in the data (such as photos, music, etc.) . If you need to clear, formatting own phone memory.
2. After the release of the software upgrade adds support card brush functions. Card brush method of operation: first brush card into the phone memory pack, then turn into the "Settings - About Phone - Wireless Upgrade" screen, enter the upper right corner of the green symbol, select local upgrade, find your phone into update.zip card brush package can be.
3. fixed part of the phone call will be open NFC panic.
4. WIFI optimized performance, sometimes a normal correction WIFI connection but can not connect a network problem.
5. Fixed SIM card 2 traffic sign display is unclear issues.
6. Fixed part of the application to apply for permission denied, repeatedly prompted the question.
7. The majority of users should request to remove Variety unlock and font management, there is a need to download third-party applications on their own.
8. Fixed phone MTP mode to connect the computer to transfer data, crash prone to disruptions.
9. When the correction SD card storage space is full, the phone call the next call recording cases, error prompt dial interface problem to stop the operation.
10. optimize other small BUG.
Users can upgrade the air OTA or wire brush, brush card are three ways to upgrade, we recommend using a simple and convenient way to upgrade the air OTA.
Special note: Before you upgrade, please note that a backup of important data in your phone to avoid unexpected loss of data occurs. Any data loss caused by a software upgrade, we do not take any responsibility.
Air upgrade (OTA) upgrade:
users automatically update as follows:
the user in the "Settings - About Phone - Wireless Upgrade" screen, click on the bottom "check for updates", when it detects the presence of the new software, you can install the prompts to download. Cause Air upgrade fails: the need to upgrade the use of air (OTA) customer service, do not open ROOT root authority, not to make any changes to the factory system software, streamlining, otherwise it will affect the integrity of the system files, upgrade the air (OTA) service, The current version can not be performed with the server the latest version of differential operation, you can not download the upgrade package, the upgrade will not work correctly. ROOT Once opened, compared with an irreversible action, even before closing on or restore factory settings, you can not go back to the original file and the state. Use other unofficial ROM (third party) users will not be able to use the official upgrade air (OTA) service. The air after a failed upgrade approach: wire brush to brush back the official package.
Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1
good domain S3 high version wire brush:
http://pan.baidu.com/s/1hqrezp6 password (sn): rpt7
good domain S3 high with version of the card brush:
http://pan.baidu.com/s/1mgrCrLu password (sn): lswu


JIAYU S3s (3Gb) 20150411-154516(Android 4.4)
Про прошивку:S3S-20150411-154516
Про прошивку:
(version number S3S-20150411-154516, April 21 release)
This version of the ROM is available for good domain S3 high version (Memory 3GB + 16GB version), Standard Edition and other editions Do not use this ROM.
Release of the software version number is: S3S-20150411-154516, major update points are as follows:
> is updated as follows:
> 1. Fixed some phone restart or after the upgrade battery display will jump power problems
> 2. Fixed some phone battery display allowed to question
> 3. Optimize the rear camera video effects
> 4. optimize image clarity when local micro-channel video chat
> 5. WIFI optimize performance, modified and sometimes they can not connect properly connected WIFI network problems
> 6. optimization of several other small BUG users can upgrade the air OTA or wire brush, brush card three ways to upgrade, we recommend using a simple and convenient way to upgrade the air OTA. Special note: Before you upgrade, please note that a backup of important data in your phone to avoid unexpected loss of data occurs. Any data loss caused by a software upgrade, we do not take any responsibility. Air upgrade (OTA) upgrade: users automatically update as follows: the user in the "Settings - About Phone - Wireless Upgrade" screen, click on the bottom "check for updates", when it detects the presence of the new software, you can install the prompts to download.
OTA push is in batches, the new version can not detect try again later.
Cause Air upgrade fails:
the need to upgrade the use of air (OTA) customer service, do not open ROOT root authority, not to make any changes to the factory system software, streamlining, otherwise it will affect the integrity of the system files, upgrade the air (OTA) service, The current version can not be performed with the server the latest version of differential operation, you can not download the upgrade package, the upgrade will not work correctly. ROOT Once opened, compared with an irreversible action, even before closing on or restore factory settings, you can not go back to the original file and the state. Use other unofficial ROM (third party) users will not be able to use the official upgrade air (OTA) service. The air after a failed upgrade approach: wire brush to brush back the official package.
Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1
S3 high version wire brush package: http://pan.baidu.com/s/1hqnHAZE
S3 brush high version of the card package: HTTP: //pan.baidu.com/s/1bni2hNT


JIAYU S3s (3Gb) 20150507-083407(Android 4.4)
Про прошивку:S3S-20150507-083407
Про прошивку:
(version number S3S-20150507-083407, May 8 release)
This version of the ROM is available for good domain S3 high version (Memory 3GB + 16GB version), Standard Edition and other editions Do not use this ROM.
Release of the software version number is: S3S-20150507-083407 , major update points are as follows:
>> 1. Optimized Desktop Launcher fluency.
>> 2. optimization from the lock screen to unlock the desktop desktop weather widget reflect slow.
>> Upgrade 3. The optimized version of shot window display unusual problems.
>> Accuracy 4. Optimize the status bar displays the flow.
>> 5. - increase the charge indicator "Set Display" menu, message alert light control switch.
>> 6. Increase the camera shutter sound control switch.
>> 7. fixes a number of small BUG. Users can upgrade the air OTA or wire brush, brush card are three ways to upgrade, we recommend using a simple and convenient way to upgrade the air OTA. Special note: Before you upgrade, please note that a backup of important data in your phone to avoid unexpected loss of data occurs. Any data loss caused by a software upgrade, we do not take any responsibility. Air upgrade (OTA) upgrade: users automatically update as follows: the user in the "Settings - About Phone - Wireless Upgrade" screen, click on the bottom "check for updates", when it detects the presence of the new software, you can install the prompts to download. Cause Air upgrade fails: the need to upgrade the use of air (OTA) customer service, do not open ROOT root authority, not to make any changes to the factory system software, streamlining, otherwise it will affect the integrity of the system files, upgrade the air (OTA) service, The current version can not be performed with the server the latest version of differential operation, you can not download the upgrade package, the upgrade will not work correctly. ROOT Once opened, compared with an irreversible action, even before closing on or restore factory settings, you can not go back to the original file and the state. Use other unofficial ROM (third party) users will not be able to use the official upgrade air (OTA) service. The air after a failed upgrade approach: wire brush to brush back the official package. Brush driver and utility software:
http://pan.baidu.com/s/1kT7pmB1
S3 high version wire brush: http://pan.baidu.com/s/1gds4hub
S3 brush high version of the card: HTTP: // pan. baidu.com/s/1c0GqPZa


JIAYU S3Sn (3Gb) 20150514-223607(Android 4.4)
Про прошивку:S3Sn-20150514-223607
Про прошивку:
(version number S3Sn-20150514-223607, 2015年5月16 release)
недоступно для скачивания на сайте
http://113.106.90.153/…Dtypeid%26typeid%3D253
Good domain had already begun by the end of 2014 the new UI design and development work, earlier this year we have a new UI available to small-scale test version of the forum moderators and assist in testing some friends, a lot of friends in the experience of the test to the feedback we collected a lot of bug or opinions and suggestions, which effectively helped perfect the new UI as soon as possible, where special thanks for their support and dedication!
The software for good domain S3 high version (3GB RAM + 16GB ROM, support NFC), may occur after Standard Edition Brush unforeseen problems is not recommended.
The new UI system based domain android4.4 system is better designed and developed a complete set of new style interface system, increasing many user-friendly features, attractive interface at the same time enhance the efforts to improve the user experience.
The new UI system upgrade due to changes in the larger, does not support upgrading from the original factory system OTA-upgrade, you must wire brush way upgrade.
The new UI system is relatively new software, there are still some BUG resolved to be optimized, it is only available to those in need early adopters of friends their own brush machine to use, the official factory pre-installed the new phone will continue the old system UI.
After the user wire brush to upgrade to the new UI system, the follow-up version of the update will be available OTA-upgrade support.
The new system default UI offers colorful, business sets the theme for the different preferences of users choose to use. Business theme BUG existing icon displays to be updated.
Brush upgrade considerations:
1, the wire brush way upgrade, mobile phone users any original data is completely lost, ask the user to upgrade before the note back up important data on their own. Any data loss caused by a software upgrade, we do not take any responsibility.
2, after the upgrade if the user needs to return to the old version of the UI system, wire brush package brush back to the original system.
Download:
Brush driver and utility software: http://pan.baidu.com/s/1kT7pmB1
good domain S3 high version of the new UI wire brush package: http://pan.baidu.com/s/1qWJW39M extract Password: u7xg


JIAYU S3SN (3Gb) 20150525-114325(Android 4.4)
Про прошивку:S3SN-20150525-114325
Про прошивку:
(version number S3SN-20150525-114325, 2015.5 на основании 27 January)
http://113.106.90.153/…Dtypeid%26typeid%3D253
The software version number is S3SN-20150525-114325, the software is suitable for good domain S3 high version (3GB RAM + 16GB ROM, support NFC). Standard Brush may occur after an unforeseen problem does not recommend the use of the standard version of the software will be released in the high version of the software is relatively perfect.
The new UI system based domain android4.4 system is better designed and developed a complete set of new style interface system, increasing many user-friendly features, attractive interface at the same time enhance the efforts to improve the user experience.
The new UI system upgrade due to changes in the larger, does not support upgrading from the original factory system OTA-upgrade, you must wire brush way upgrade. Refreshed UI system can brush card upgrade.
The new UI system is relatively new software, there are still some BUG resolved to be optimized, it is only available to those in need early adopters of friends their own brush machine to use, the official factory pre-installed the new phone will continue the old system UI.
Excerpts major update points are as follows:
1, repair business when you switch themes icons do not update in question
2, remove the phone Housekeeping and weather APK
3, front camera default automatically flip the image
4, optimization gesture sensing
5, optimization WIFI connection stability
6 to optimize the authorization refused repeatedly prompted the question
7, other known small bug
Brush upgrade considerations:
1, the wire brush way upgrade, mobile phone users any original data is completely lost, before your users back up their own important Upgrade the data. Any data loss caused by a software upgrade, we do not take any responsibility.
2, after the upgrade if the user needs to return to the old version of the UI system, wire brush package brush back to the original system.
Download:
Brush driver and utility software: http://pan.baidu.com/s/1kT7pmB1
wire brush package links: http://pan.baidu.com/s/ 1eQ3wwSU Password: emsv
card brush package links: http://pan.baidu.com/s/1ntqWNAp Password: cpcy


JIAYU S3SN (3Gb) 20150612-181316(Android 4.4)
Про прошивку:S3SN-20150612-181316
Про прошивку:
good domain S3 android4.4 system new UI version (S3SN-20150612-181316) 2015年6 18 issued
The software version number is S3SN-20150612-181316, good domain S3 high version, standard version available through the brush to use (Standard Edition because of their hardware does not support NFC function, so after the upgrade will not be able to use NFC functionality).
The new UI system based domain android4.4 system is better designed and developed a complete set of new style interface system, increasing many user-friendly features, attractive interface at the same time enhance the efforts to improve the user experience.
Excerpts software changes the contents are as follows:
1. If the repair does not show incoming or outgoing question which SIM cards of
2. The business topic optimization
3. System fluency optimization
4. music back to its native
5. Other known bug fixes Brush upgrade considerations: 1, after the upgrade, mobile phone users exist any original data loss risk, before you back up your own user Upgrade important data. Any data loss caused by a software upgrade, we do not take any responsibility. 2, the original system to the new UI earlier versions, you can brush card upgrade, upgrade the air can also try OTA update. Versions for other systems, it is recommended wire brush upgrade. 3, after the upgrade if the user needs to return to the old version of the UI system, wire brush package brush back to the original system. The new system UI interface preview Personas theme business theme
Download:
Brush driver and utility software: http://pan.baidu.com/s/1kT7pmB1
S3SN wire brush: http://pan.baidu.com/s/1hqq2pne
S3SN card brush: http://pan.baidu.com/s/1hq9zgg8


JIAYU S3S (3Gb) 20150616-210055(Android 5.1)
Про прошивку:S3S-20150616-210055
Про прошивку:
good domain S3 android5.1 system (version S3S-20150616-210055, 2015年6月17 issued)
Release of the software version number is: S3S-20150616-210055, good domain S3 high version, standard version available through the brush to use (Standard Edition because of their hardware does not support NFC function, so after the upgrade will not be able to use NFC functionality).
This version 5.1 system is purely android5.1 native style, no custom UI, not custom modifications and add some users expect a variety of so-called "user-friendly features," If you are a user experience, features a more personalized care users, Based on the official recommended to use the new UI firmware version 4.4.
android5.1 system Google newer version, the current software compatibility is not very good, there may be some application software can not run perfectly, this is an application software compatibility problems, not problems ROM, please wait for the application software updates, I believe that with the popularity of the application software compatibility with the updated 5.0 system will be more perfect.
Compared to June 4 release trial version, this version of software updates main points are as follows:
1, increasing the system bell.
2, modified front camera red hair problem.
3, to improve the sound quality loud speaker.
4, Hugh positive models displayed incorrectly issues.
5, modified high version NFC function does not work in question.
6, other known small bug.
After the release of the software update, the phone functions can be used normally, but does not rule still exists in some of our tests have not found the bug, welcome user feedback in the forum S3 zone, so that we can verify the fix, thank you!
Note: The original system must wire brush version 4.4 upgrade, the original system to version 5.1 update can brush card. Note that the backup phone before upgrading important data to avoid loss.
Perfect upgrade version Android5.1 system Google android5.0 system, to make up for the previous Android 5.0 "lollipop" a number of deficiencies, perfect support 64-bit CPU is one of its greatest features. Android5.1 early as March 10, 2015 release, Google official blog of Android 5.1 for a simple introduction, first of the new system is more stable, while supporting more than one SIM card, enhanced equipment protection mechanisms, which means that if you After the phone is stolen, it will be locked until you log onto their Google accounts (even if you restore the device to factory settings will not unlock). In addition, Android 5.1 also enhances the WiFi capabilities of the device (and users can enter the Quick Setup menu to choose to join a different WiFi or Bluetooth device management), added HD voice and so on.
Security Bunny ran sub-test, the score reaches 44580 points security Bunny test: 64bit systems Download:
Brush driver and utility software: http://pan.baidu.com/s/1kT7pmB1
Wire brush package: http://pan.baidu.com/s/1pJC89D5
Cards brush package: http://pan.baidu.com/s/1jGKksEa (the original system to version 5.1 in order to use card brush package, the original system to version 4.4 must wire brush upgrade to 5.1)


JIAYU S3S (3Gb) 20150623-142703(Android 5.1)
Про прошивку:S3S-20150623-142703
Про прошивку:
good domain S3 android5.1 system (S3S-20150623-142703) 2015年6月24 release
Release of the software version number is: S3S-20150623-142703 , good domain S3 high version, standard version available through the brush to use (Standard Edition because of their hardware does not support NFC function, so after the upgrade will not be able to use NFC functionality).
Perfect upgrade version Android5.1 system Google android5.0 system, to make up for the previous Android 5.0 "lollipop" a number of deficiencies, perfect support 64-bit CPU is one of its greatest features. Android5.1 early as March 10, 2015 release, Google official blog of Android 5.1 for a simple introduction, first of the new system is more stable, while supporting more than one SIM card, enhanced equipment protection mechanisms, which means that if you After the phone is stolen, it will be locked until you log onto their Google accounts (even if you restore the device to factory settings will not unlock). In addition, Android 5.1 also enhances the WiFi capabilities of the device (and users can enter the Quick Setup menu to choose to join a different WiFi or Bluetooth device management), added HD voice and so on.
Android5.1 system Google newer version, the current software compatibility is not very good, there may be some application software can not run perfectly, this is an application software compatibility problems, not problems ROM, please wait for the application software updates, I believe that with the popularity of the application software compatibility with the updated 5.0 system will be more perfect.
This version 5.1 system is purely android5.1 native style, no custom UI, recommended for advanced players to use. The official forum for various BUG 5.1 collect user feedback system in order to improve the follow-up version of the optimization. Users Brush and use a variety of issues that may arise, please seek mutual resolve on their own in the forum, the official does not provide support services. If you are the user experience, the more concerned about the stability of the system users, it is recommended to use the factory version of the official 4.4 firmware. Not recommended for novice users and use this version of the software brush.
Compared to June 17 release of the software, this version of software updates main points are as follows:
1. Increase the off-screen smart wake function.
2. Lower the keyboard light brightness.
3. Setup - displays the menu and increase control of the keyboard lights off switch.
4. optimize battery curve, improved battery charging display is not accurate.
5. Optimize system compatibility and fluency.
6. Increase air OTA updates.
7. Other known small BUG.
Note: The original version of the 4.4 system upgrade must wire brush; the original system to version 5.1 update can brush card, also waiting for the air to push OTA upgrade. Note that the backup phone before upgrading important data to avoid loss.
Download:
Brush driver and utility software: http://pan.baidu.com/s/1kT7pmB1
Wire brush package: http://pan.baidu.com/s/1o6sYp0Q
Cards brush package: http://pan.baidu.com/s/1bnwIy1x (the original system to version 5.1 in order to use card brush package, the original system to version 4.4 must wire brush upgrade to 5.1)
Brush tutorial see friends luang Posts: http://bbs.ejiayu.com/thread-1266114-1-1.html


SP FlashTool v5.1452.00.000 =>>>Прикрепленный файлSP_FlashTool_v5.1452.00.000.rar ( 24.67 МБ )

SP FlashTool v5.1512.00.000 =>>>Прикрепленный файлSP_FlashTool_v5.1512.00.000.zip ( 33.87 МБ )

SP FlashTool v5.1516.00.000 =>>>Прикрепленный файлSP_Flash_Tool_v5.1516.00.zip ( 39.79 МБ )

Драйвера для подключения и прошивки =>>>Прикрепленный файлDRIVERS_ALL.rar ( 721.91 КБ )

PS:
у кого при прошивке SP FlashTool выдает ошибку 8417 - уберите из пути к скаттер-файлу иероглифы и уменьшите длинну пути до него (до файла)
к примеру, такой путь будет нормальным:D:\JIAYU\S3\1_FLASH\S3s(3gb)-20150204-161147\MT6752_Android_scatter.txt
а вот такой выдаст ошибку D:\JIAYU\S3\1_FLASH\S3-20150204-161147线刷\MT6752_Android_scatter.txt

Сообщение отредактировал dub3000 - 24.06.15, 19:28



Реп: (1852)
Эксклюзив прямиком от завода.драйвера и софт для s3.как говорится спешл эдишн.

Прикрепленные файлы

Прикрепленный файлS3.rar ( 25.31 МБ )


Сообщение отредактировал crocodil2 - 08.02.15, 08:53



Реп: (22)
На всякий случай, тут то рекавери из жуйкиной фирменной утилиты.



Реп: (2024)
Прикрепленное изображение

TWRP Recovery 2.8.4.0
Скачать Прикрепленный файлTWRP_Recovery_JY-S3.rar ( 9.85 МБ )

Download TWRP Recovery
Скрины TWRP
Прикрепленное изображение
Прикрепленное изображение
Прикрепленное изображение
Прикрепленное изображение


Как прошить recovery ТУТ

Чтобы попасть в recovery надо подсоединить USB кабель к компу или ЗУ,Кнопку + и Вкл

NEW TWRP Recovery 2.8.5.0

Прикрепленное изображение
Скрины TWRP
Прикрепленное изображение
Прикрепленное изображение
Прикрепленное изображение
Прикрепленное изображение

Скачать Прикрепленный файлTWRP_2850_JY_S3.rar ( 11.08 МБ )

Вопросы в QMS


Сообщение отредактировал hanuma50 - 08.04.15, 17:12
Причина редактирования: Исправил TWRP 2850



Реп: (2024)
Как прошить CWM/TWRP Recovery
Как прошить Recovery через Flash Tool
Прикрепленное изображение

Flash Tool v5.1452 Скачать
Драйвера Скачать
Установка драйверов для Win8 Читать

Чтобы попасть в recovery надо подсоединить USB кабель к компу или ЗУ,Кнопку + и Вкл

Сообщение отредактировал hanuma50 - 20.02.15, 01:25



Реп: (1695)
M
Переезжаем в подраздел Jiayu
Плодотворного общения!



Реп: (1149)
Рабочее рекавери TWRP от испанцев Прикрепленный файлTWRP_recovery.zip ( 10.91 МБ )

Устанавливать через флэштул,открываем из флэштула скаттер из приложенного архива,жмём download и подключаем выключенный телефон.Если драйвера стоят правильно пробежит две полоски красная и жёлтая,надпись OK ,всё,рекавери у вас в телефоне.



Реп: (11)
edik-skv @ 11.02.2015, 00:11 *
Рабочее рекавери TWRP от испанцев

Подтверждаю, всё работает! Предлагаю внести в шапку.



Реп: (53)
edik-skv @ 10.02.2015, 23:11 *
станавливать через флэштул,открываем из флэштула скаттер из приложенного архива,жмём download и подключаем выключенный телефон.Если драйвера стоят правильно пробежит две полоски красная и жёлтая,надпись OK ,всё,рекавери у вас в телефоне.

А что старый добрый метод через MOBILE UNCLE не канает???
Установил apk, закинул recovery.img на флешку... зашел в пункт обновление рекавери->обновить рекавери->ВСЕ!
???



Реп: (67)
* sidorchuke, и у тебя пошло?потому что у меня нет,и вообще через дядю и инженерного меню нету



Реп: (22)
Само TWRP то запускается. Но хоть что-нибудь с него устанавливается?



Реп: (15)
shellcode @ 11.02.2015, 11:57 *
Само TWRP то запускается. Но хоть что-нибудь с него устанавливается?

edik-skv пишет "Рабочий рекавери, бэкап делает и восстанавливает."
Т.е. функция резервного копирования и восстановления пашет.
А что конкретно у тебя из него не установилось?



Реп: (1149)
[quote]что-нибудь с него устанавливается?[quote]
Устанавливается,собрал патч камера от леново с их драйверами всё поставилось.Потестю и если всё норм выложу попозже.



Реп: (53)
darzamat123 @ 11.02.2015, 10:26 *
orchuke, и у тебя пошло?потому что у меня нет,и вообще через дядю и инженерного меню нету

смотря какой дядя установлен))



Реп: (67)
* sidorchuke, и какие ещё варианты, кроме mobileuncle tools есть?

Сообщение отредактировал darzamat123 - 11.02.15, 13:33



Реп: (53)
darzamat123 @ 11.02.2015, 12:32 *
кроме mobileuncle tools есть?

Flashtool... вон hanuma50 все выложил!

И для ModRecovery. Но судя по всему в ветке еще нету таких!


Полная версия   Текстовая версия

Помощь   Правила

Сейчас: 29.03.24, 05:05